Recent Searches

Share this Post

Share on facebook
Share on twitter
Share on linkedin
Share on email

Home
Automated Testing for High-Speed Digital Standards (Boot Camp)
Lesson 5 - USB Type-C Design Simulation & Automated Testing

Fill form to unlock content

Loading, please wait

Error - something went wrong!

Unlock Content

Thank you!

Lesson 5 - USB Type-C Design Simulation & Automated Testing

Published Date July 15, 2022

Previous Lesson

Lesson 4 - PCIe Technology - Design Simulation

Learn how automated design software can be used to model the PCIe 6.0 channel, transmitters, and receivers, ensuring your device or system meets spec while still in simulation.
Next Lesson

Lesson 6 - DDR5 Memory Simulation and Analysis

A computer is only as fast as its memory. Learn how to effectively simulate and analyze your DDR5 memory device design using Keysight’s PathWave Memory Designer.

Additional Course Resources

9 months ago
Lesson 1 - How Emerging Technology Drives New Digital Data Standards

5G, autonomous driving, and other technologies push the boundaries of data center infrastructure. The digital data standards that they run on are getting faster to meet the demand.

View Course
9 months ago
Lesson 2 - PCIe 6.0 Technology Overview and Test Challenges

The PCIe 6.0 spec is arriving to double the data rate of PCIe 5.0. Learn some of the benefits and challenges of the new standard.

View Course
9 months ago
Lesson 3 - PCIe Technology – Designing for Signal Integrity

PCIe 6.0 introduces several potential physical layer challenges. Learn to design and test PCIe channels for signal integrity with Keysight's Physical Layer Test System software.

View Course
9 months ago
Lesson 4 - PCIe Technology - Design Simulation

Learn how automated design software can be used to model the PCIe 6.0 channel, transmitters, and receivers, ensuring your device or system meets spec while still in simulation.

View Course
9 months ago
Lesson 6 - DDR5 Memory Simulation and Analysis

A computer is only as fast as its memory. Learn how to effectively simulate and analyze your DDR5 memory device design using Keysight’s PathWave Memory Designer.

View Course
9 months ago
Lesson 7 - Ethernet Standards Overview and Testing Challenges

Learn about the latest networking specifications from IEEE and OIF-CEI and how to solve the challenges that developers may encounter when designing at 200 Gbps/lane speeds.

View Course
9 months ago
Lesson 8 - Ethernet – Noise and Jitter Measurements

Learn how noise and jitter affect vertical eye closure, how the type of oscilloscope you use affects your measurements, and how the IEEE 802.3ck addresses these impairments.

View Course
9 months ago
Lesson 9 - Ethernet - Solving Frame Loss with Forward Error Correction

Learn how to lower bit error rates in PAM-4 communications using forward error correction and how to solve issues such as frame loss from burst errors.

View Course
8 months ago
Digital Design and Interconnect Standards

https://learn.keysight.com/i/1474415-digital-design-and-interconnect-standards

View Course
8 months ago
5th Generation High-Speed Digital Designs Considerations

https://learn.keysight.com/i/1474414-5th-generation-high-speed-digital-designs-considerations

View Course
8 months ago
High-Performance Digital Products Catalog

https://learn.keysight.com/i/1474411-high-performance-digital-products-catalog

View Course
8 months ago
PathWave Design and Test Software Catalog

https://learn.keysight.com/i/1474409-pathwave-design-and-test-software-catalog

View Course
8 months ago
How to Test and Troubleshoot USB4

https://learn.keysight.com/i/1474407-how-to-test-and-troubleshoot-usb4

View Course
8 months ago
The Evolution of PCIe® Standards and Test Requirements

https://learn.keysight.com/i/1474406-the-evolution-of-pcie-standards-and-test-requirements

View Course
8 months ago
Data Center Ethernet Technology and Evolution to 224 Gbps

https://learn.keysight.com/i/1474403-data-center-ethernet-technology-and-evolution-to-224-gbps

View Course

Return to Home