Lesson 1 - Introduction to Serial Protocols
What are serial protocols, which are you most likely to encounter, and why is a scope needed?
View Course
Using Oscilloscopes with Serial Protocols (Boot Camp)
Learn how to use an oscilloscope to setup, decode, trigger, and analyze common serial protocols (I2C, SPI, CAN, SENT, I2S, PSI5, UART) [75 min]
-
-
Lesson 2 - Debugging Serial Busses
Learn how to set up decoding, configure triggers, capture data, troubleshoot signal issues, and perform compliance testing with an oscilloscope.
View Course
-
Lesson 3 - Decoding Automotive Protocols
Let's take a closer look at decoding and triggering with CAN and SENT signals, common protocols used in the automotive industry.
View Course
-
Lesson 4 - Decoding Embedded Protocols
We'll explore configuring a scope for common embedded protocols such as I2C, I2S, and PSI5.
View Course
-
Debugging Your Embedded Design Faster with Oscilloscopes
https://learn.keysight.com/i/1482935-debugging-your-embedded-design-faster-with-oscilloscopes
View Course
-
Evaluating Oscilloscopes to Debug Mixed-Signal Designs
https://www.keysight.com/discover/i/1482948-evaluating-oscilloscopes-to-debug-mixed-signal-designs
View Course
-
Choosing an Oscilloscope for Protocol Analysis Applications
https://learn.keysight.com/i/1482942-choosing-an-oscilloscope-for-protocol-analysis-applications
View Course
-
Using an MSO Oscilloscope To Debug an Automotive CAN Bus
https://learn.keysight.com/i/1482947-using-an-mso-oscilloscope-to-debug-an-automotive-can-bus
View Course
-
Mixed Signal Oscilloscope Debugging on Serial Bus
https://learn.keysight.com/i/1482949-mixed-signal-oscilloscope-debugging-on-serial-bus
View Course
-
PSI5 Sensor Triggering on and Decoding the Serial Bus
https://learn.keysight.com/i/1482950-psi5-sensor-triggering-on-and-decoding-the-serial-bus
View Course
